HSSE Drills (with Cobalt) - HSS, HSSE & Powder Metal Drills

Gold-P TiN Coated HSS 5 Percent Cobalt Jobber Drill - DLGP195 (YG-1)

The DLGP195 series Gold-P jobber drills are a best selling HSS drill in the Cutwel range. These 5 Percent cobalt drills have a TiN coating working area and the higher cobalt content reduces cost and i...

TiN Coating on working area with 5% Cobalt content reduces cost and increases tool life compared to standard HSS drill
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling
General purpose drill for Steel, Stainless Steel, Titanium and Inconel
Cutwel's BEST SELLING Drill
The most economic coated drill in our range

Size

Diameter (mm)	1 - 13
Overall Length (mm)	34 - 151
Flute Length (mm)	12 - 101
Shank (mm)	1 - 13

From £2.90 £2.42

View Products

Morse Taper HSS 5 Percent Cobalt Jobber Length Drill - DL205 (YG-1)

The DL205 series YG-1 HSS 5 Percent cobalt jobber length drills have a morse taper shank and are ideal for heavy duty drilling of Steel, Cast Steel (alloyed or Non-Alloyed), Grey Cast Iron, Malleable ...

5xD Jobber Length Drill.
Morse Taper Shank.
Made from a HSS substrate with a 5% cobalt content.
Bright Finish.
Suitable for machining Steels
HSS 5% Cobalt for extra tool life.
Heavy duty.

Size

Diameter (mm)	13 - 30
Overall Length (mm)	182 - 296
Flute Length (mm)	101 - 175

From £49.87 £41.56

View Products

TiN Coated HSS 8 Percent Cobalt Stub Drill - D4107 (YG-1)

The D4107 series stub drills feature a HSS 8 Percent cobalt substrate for far greater tool life and performance over HSS or HSS 5 Percent cobalt drills, especially in harder wearing materials. These T...

3xD Stub Drill.
Made from a HSS substrate with an 8% cobalt content.
TiN coated.
Suitable for machining Steels
Great tool life and performance with low hardness steels, cast iron & aluminium compared to standard HSS drills due to 8% Cobalt content.
Also suitable for stainless steel, inconel and titanium.
TiN coating on the full length of the flutes.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Size

Diameter (mm)	1 - 16
Overall Length (mm)	26 - 115
Flute Length (mm)	6 - 58
Shank (mm)	1 - 16

From £4.09 £3.41

View Products

TiN Coated HSS 8 Percent Cobalt Jobber Drill - D4105 (YG-1)

The D4107 series jobber drills feature a HSS 8 Percent cobalt substrate for far greater tool life and performance over HSS or HSS 5 Percent cobalt drills, especially in harder wearing materials. These...

5xD Stub Drill.
Made from a HSS substrate with an 8% cobalt content.
TiN coated.
Suitable for machining Steels
Great tool life and performance with low hardness steels, cast iron & aluminium compared to standard HSS drills due to 8% Cobalt content.
Also suitable for stainless steel, inconel and titanium.
TiN coating on the full length of the flutes.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Size

Diameter (mm)	1 - 16
Overall Length (mm)	34 - 178
Flute Length (mm)	12 - 120
Shank (mm)	1 - 16

From £3.55 £2.96

View Products

Uncoated HSS 8 Percent Cobalt Stub Drill - D2107 (YG-1)

The D2104 series are an uncoated style stub length drill made from HSS 8 Percent Cobalt for increased tool life compared to standard HSS drills. Ideal for low hardness steels, cast iron and aluminium....

3xD Stub Drill.
Made from a HSS substrate with an 8% cobalt substrate.
Bright finish for aluminium drilling.
Suitable for machining Steel
Great tool life and performance compared to HSS drills due to 8% Cobalt content.
Ideal for low hardness steels, cast iron & aluminium.
Also suitable for stainless steel, inconel and titanium.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Size

Diameter (mm)	1 - 30
Overall Length (mm)	26 - 168
Flute Length (mm)	6 - 84
Shank (mm)	1 - 30

From £1.79 £1.49

View Products

Uncoated HSS 8 Percent Cobalt Jobber Drill - D2105 (YG-1 )

The D2105 series are an uncoated style jobber length drill made from HSS 8 Percent Cobalt for increased tool life compared to standard HSS drills. Ideal for low hardness steels, cast iron and aluminiu...

5xD Jobber Drill.
Made from a HSS substrate with an 8% cobalt substrate.
Bright finish for aluminium drilling.
Suitable for machining Steel
Great tool life and performance compared to HSS drills due to 8% Cobalt content.
Ideal for low hardness steels, cast iron & aluminium.
Also suitable for stainless steel, inconel and titanium.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Size

Diameter (mm)	1 - 20
Overall Length (mm)	34 - 205
Flute Length (mm)	12 - 140
Shank (mm)	1 - 20

From £2.18 £1.82

View Products

Uncoated HSS 8 Percent Cobalt Long Drill - D2104 (YG-1)

The D2104 series are an uncoated style long length drill made from HSS 8 Percent Cobalt for increased tool life compared to standard HSS drills. Ideal for low hardness steels, cast iron and aluminium....

10xD Long Length Drill.
Made from a HSS substrate with an 8% cobalt substrate.
Bright finish for aluminium drilling.
Suitable for machining Steel
Great tool life and performance compared to HSS drills due to 8% Cobalt content.
Ideal for low hardness steels, cast iron & aluminium.
Also suitable for stainless steel, inconel and titanium.
Normal point up to 1.6mm, split point over 1.6mm for higher accuracy drilling.

Size

Diameter (mm)	2 - 12
Overall Length (mm)	85 - 205
Flute Length (mm)	56 - 134
Shank (mm)	2 - 12

From £6.26 £5.22

View Products